 |
 |
 |
 |
 |
|
|
|
|
|
QDMuX - 24 Channel DMX to 0-10V dc analogue
demultiplexer
The QDMuX provides a remarkably-priced 24 channels of DMX to analogue decoding in a one unit rack-mount exterior. It is also a convenient interface between standards, the DMX line being connected through 5-pin XLR's to the front or 3-pin XLR's to the rear. Analogue outputs are in six channel groups on the front face and four channel on the rear.
The front panel alpha-numeric display shows the DMX start address, which may be set anywhere in the data chain, plus the current status of the programming options. In the event that a DMX line failure is detected you can opt for a total blackout, to hold the last input or to recall a previously stored scene.
Using the display in conjunction with the 24 output monitor LED's you can quickly verify whether a signal is being received and at what address.
Technical
| Signal Input: | USITT DMX512 |
| Input Socket (Front): | DMX512 via 5-pin XLR |
| Input Socket (Rear): | DMX512 via 3-pin XLR |
| Link through (Front): | DMX512 via 5-pin XLR |
| Link through (Rear): | DMX512 via 3-pin XLR |
| Signal Output: | +10v dc analogue (-10v version available) |
| 10mA per channel | |
| Output Sockets (Front): | 4 x 8-pin locking DIN socket (female) |
| Output Sockets (Rear): | 6 x 5-pin DIN socket (female) |
| Power Supply: | 220-240v AC 50-60Hz |
| 100-120v AC 50-60Hz version available | |
| Dimensions: | 1U (44mm) x 19" (482mm) x 165 mm |
| Weight: | 3.5Kg |