| Q24 details in other languages | Q12 Pages |

Q24
24
Channel, 2 Preset Memory Desk
Similar in specification to the Q12, this two preset desk has additional features making it the most versatile lighting control board in its class.
A
flash master fader has been added to the preset and chase
masters. Like the Q12, the flashbuttons may be set to operate on
each channel or scene and the master B fader can be inverted for
smooth one handed manual crossfading. 
Up to 240 scenes may be stored in one of the 10 pages of 24 memories, each with an individually programmed fade-in and fade-out time. Multiple scenes may be mixed from the same or different pages and stored as a new scene.
Chase sequences may be stored in any of the 24 chase memories. Each sequence may be set to loop continuously or run once only, to crossfade or switch between steps and is stored with its own run speed setting. Multiple sequences may be run at the same time at different speeds.
The
Q24 outputs both 0-10volts analogue and DMX512 serial protocol
simultaneously. Each output channel may be mapped
to any of the first 96 channels in
the DMX chain. The Q24 is powered by a remote universal power
supply unit or phantom supply from compatible dimmers.
Technical
Power Supply: +15 to +18V DC 800mA via special PSU or phantom feed from four dimmers. Outputs: Analogue 0 to+10V DC via locking DIN's and DMX512 via XLR5. Audio Input: Mono 1/4" Jack, 775mV line level. Also internal microphone. Dimensions: Tabletop version overall 675 x 312 x 120mm. Weight: 7Kg.
copyright
This page was last edited on 21/03/03
BACK TO PRODUCTS | HOME