BACK TO PAGE 1

>> HARD WIRED MODELS. Available in 10, 16, 20 and 25 Amp per channel models, for either 19” rack or wall mounting. Rack mounted units provide full internal access whilst still installed and wired into a rack via the unique sliding chassis.

>> SINGLE or 3 PHASE. 10 Amp per channel models can be operated on single or three phase + Neutral and Earth supplies - Higher loading 16, 20 and 25 Amp per channel models are designed for three phase + Neutral and Earth operation only.

>> DELTA SUPPLY OPTION. All Paradime models are available to order for operation on three phase DELTA configuration supplies. Double pole circuit breakers are also available as an order option.

...Remote push-button control of pre-set
lighting levels without additional
control gear...

>> SCENE CONTROL. 8 scenes may be programmed into any model in the Paradime range by either capturing the current DMX /Analogue signal or local control/pre-heat setting. Scenes can be ‘played back’ from the front panel controls or remote push-button panel connected to the analogue input. When used together with the selectable fade in/out feature this provides for sophisticated pre-set lighting control without any additional controller in bars, restaurants, shops, offices, exhibition stands etc. Scene control can be ‘mixed’ with the DMX512 input for dual control in multi-purpose venues.All the scene control technology is contained within the Paradime dimmer. This allows simple custom scene control panels to be constructed, using any design of push-button, for the specific application Panels can be cost effectively produced to fit in with any decorative style or scheme.

>> LCD DISPLAY MODULE. All the functions of the Paradime, including set-up, configuration, programming and performance monitoring are menu-driven from the high definition LCD display and set using the adjacent pushbuttons. Any faults detected by the system during start-up self test or normal operation are reported. In the event of a malfunction being detected that may affect correct operation, the display will request the unit is attended by a technician and an inspection and reset performed.

>> MONITOR FUNCTIONS. The LCD display can be used to monitor the analogue or DMX input. The DMX level of any channel within the complete 512 channel system can be displayed, enabling system-wide fault finding. Levels are displayed for the chosen channel in either 0-255 or 0-100%.

>> LED INDICATORS. Six LED's show the current level of each channel. Situated next to the LCD display - particularly useful when setting options for lighting located out of sight elsewhere in the installation.

>> USER & INSTALLER LOCKS. User settings can be ‘software locked’ from the front panel to prevent accidental or unauthorised change. Installer set features can be ‘electrically locked’ from within the unit during installation/commissioning.

Wall mounted installations are both quick
and neat with the low
profile design case.

>> WALL MOUNT FOR EASY INSTALL. The wall mounted versions of the Paradime are supplied with a separate mounting bracket allowing an easy ‘first fix’ without the main chassis. All cable and distribution metalwork can be be attached before the dimmer electronics are mounted. Once placed into position, the specially designed chassis allows extra room for making cable connections. It is then slid into it’s final position before the lid is screwed on.This design ensures the unit takes up the minimum of wall space in both single unit and multiple installations and is suitable for all commercial and industrial applications.

>> FAST SERVICING- NO TOOLS! All power devices and drive electronics can be replaced just as quickly out in the field as in the workshop - this reduces any down-time and servicing costs. Triac output devices are held by a snap-in clip and connected by solderless terminals, the associated signal electronics are on a plug-in circuit board.

GO TO PAGE 3 , BACK TO PAGE 1 , TOP OF THIS PAGE

copyright
This page was last updated on 21/03/03
PRODUCTS PAGE