Buffer / Data Distributor

Probably the most state-of-the-art DMX serial data distributor available. Full 1KV galvanic isolation between input and each of the 4 outputs. Each output is fitted with both 3 pin and 5pin XLRs - all 8 output lines have DMX status indicators. A hook clamp securing bolt and secondary fixing loop are provided on the original truss mount version, the 19” rack mount version is in a 1U format. Both versions are available with all 5pin

19" Rack Mounted Version available with:

• 8 x 3 pin XLRs Individually isolated
• 4 x 3 pin & 4 x 5 pin XLRs Individually isolated
• 8 x 5 pin XLRs Individually isolated

- Rack mounted version

Truss Mounted Version available with:

• 4 x 3 pin & 4 x 5 pin XLRs Individually isolated
• 8 x 5 pin XLRs Individually isolated

- Truss mounted version

RJ45 Buffer / Data Distributor

- Rack mounted

DMuX

Low cost 24 channel DMX512 to 0-10V analogue demultiplexer with full status
indication and signal fail back-up state. Both 3pin and 5pin XLRs are provided
for DMX input and thru connection. 5pin and 8pin DIN output sockets allow for
connection into either 4 or 6 channel analogue wiring formats.
A negative output model is available to allow operation with older Strand
Lighting dimming products working on zero to minus 10v signals.

• DMuX 24ch Analogue +10v outputs
  
• DMuX 24ch Analogue -10v outputs

STORE

Designed for use either as a backup to a full desk of all 512 DMX channels or as a stand-alone 512 channel replay unit in exhibition and ‘experience’ situations.
Remote control inputs allow for integration with show control systems and
remote custom switch panels to recall any of the 63 captured 512 channel
scenes.

It can:

• Store up to 64 scenes of 512 channels of DMX information
  
• Edit fade and hold times
  
• Combine scenes into repeating loops
  
• Play back scenes from front panel switch/slider or remote switches
  
• Use to back up main show controller or as stand-alone playback unit

Replica

The Replica is a partner product to Lightprocessor’s QCommander256 controller.

It is designed for use in situations where further programming of the lighting is not envisaged and the requirement is simply to play back previously-recorded programmes, usually in an architectural application such as a museum or retail premises.

Programmes are originated on a QCommander256 and then transferred into the Replica via the PCMCIA memory card supplied. All functions of the QCommander256 are available in the Replica.